INRAL NITRO PRIMER – protective fast-drying spray primer and filler for metal, plastic, wood, glass, stone, cement and stucco. It is easy to apply, has excellent adhesion to the substrate, allows to uniform the surfaces and eliminate small scratches and imperfections before painting. Recommended as a primer for INRAL ACRYLIC UNIVERSAL and other spray paints. Best sprayed at +20 °C. At temperatures below +18 °C, drying times and paint properties deteriorate.
Does not contain lead and chromium compounds, does not deplete the ozone layer.
Coverage: about 2m2
Working temperature: from +10 to +25 ºC
Use between +10 and +25 °C on surfaces at the same temperature, in well ventilated environments. Clean and degrease the surface. Shake the vial vigorously for 2 min. Spray a layer in cross coats, keeping a distance of 20 cm. The results are better when applied in a thin layer with a break several times.
When finished, turn the vial upside down and clean the atomizer by holding it down for a few seconds. After full-drying sandable with fine-grained paper.
Store vertically at +10 °C…+25 °C temperature and relative air humidity of max. 60%.
Shelf life: 10 years if appropriate storage provided.
Package: 400 ml
