POINT 105 HYBRI FIX MARINE sealant and adhesive, black

This is is hybrid technology, specifically developed for repairing boats, roofs, swimming pools and other works. Has excellent adhesion to most materials- teak, wood, ceramic, marble, aluminum, iron, stainless steel, copper and various types of plastic (polycarbonate, polyester, polystyrene, PVC, etc.).

SKU: 03-4-0-115
Color: Black
Filling: 290 ml
  • Good output even at low temperatures
  • Does not slump in vertical joints
  • Good adhesion on moist surfaces
  • Excellent mechanical properties, extremely solid
  • Once hardened it can be sanded

POINT 105 Hybri Fix Marine has excellent mechanical properties. Does not cause metal corrosion. Suitable for gluing and sealing porous and non-porous surfaces. Suitable for outdoor and indoor use. It can be painted with most epoxide-, polyurethane- and water-based paints and coatings. Has good chemical resistance to water, aliphatic solvents, mineral oils, fats, diluted inorganic acids and bases.
Suitable for bonding teak and other floor and wall boards, partitions and support structures both on deck and in below decks.

Certificates:
Marine- Notified body 0575/2022

Surfaces must be dry, clean and free from grease. Cut the end of the cartridge and screw the nozzle supplied with it. Insert the cartridge into the caulking gun and fill the nozzle with glue by pressing the trigger on the gun several times. The adhesive is applied with strips on the surface or the element to be bonded. After applying the adhesive, join the surfaces by strong compression. Apply Point 105 for Deck using a handheld gun or a spatula to the side to be bonded.

Indicator Units Value Certifications
Colour   Black  
Bases   hybrid MS-polymer  
Body   Paste  
Tensile strength after curing kg/cm2 22  
Elongation at break % 300  
100% modulus N/mm2 0,8 ISO 8339
Density g/cm3 1,4  
Skin formation min. 20 @ +23°C/50% RH
Correction time min. 20  
Curing speed mm/24 h 2-3 @ +23°C/50% RH
Shore A hardness   45-50 DIN 53505 3 sec.
Temperature resistance after curing oC -40°C…+90°C  
Application temperature oC +5°C…+30°C  
Shrinckage % 1  
Yield with 5 mm joint m 15  
Volume ml 290

Store upright in a dry place at +5 °C to +25 °C. Expiry date- 18 months from date of manufacture, subject to storage regulations. Frost resistance during transportation -15 °С.
Qauntity per box – 12 pcs. Quantity per pallet – 1440 pcs.